SIKLA Framo 80

Electronic Payments

Unistrut Buffalo Supports

Sikla Framo 80

Framo 80 is a versatile multi-functional system of flexible industrial framing supports.

Framo 80, designed for small to medium size loads, accomplishes an entire range of jobs with only a handful of components, and has an adapter for use with the 1-5/8'' x 1-5/8'' Unistrut channel.

Self-tapping screws are used to complete all assembly work which results in maximum flexibility and substantial time savings.

View More
/Public/Images/product/Sikla-Framo80_TPF80.jpg
TP F 80 Sikla Framo 80, 20 foot Beam Section

The TP F 80 beam section is a multi-function beam profile which can be used in horizontal, vertical and 3-D support structures, in a wide variety of building and industrial applications. 

Beam Length: 20 feet

Sikla Part Number: 112830

Structural elements and pipe supports can be attached on all 4 sides with virtually no placement restrictions.

Specially designed mounting holes, in combination with FLS self formatting screws, ensure precise  and secure placement of components.

Finish: Hot-Dipped Galvanized Steel

More Info
$341.60
Buy
View More
/Public/Images/product/Sikla-Framo80_AKF80.jpg
AK F 80 Sikla Framo 80 Cantilever Bracket

Can be mounted to:

  • a beam section
  • the TKO F 80 Beam Bracket
  • or be used to construct cross bars

*Version "E" enables the vertically hung Beam Bracket (TKO F 80) to be attached to the Cantilever Bracket (AK F 80) at the lowest point, without any overlap of the mounting plate in the vertical plane.

Finish: Hot-Dipped Galvanized Steel

Plastic End Cap ADK F 80 included (pre-assembled)

Choose options below

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_TKOF80.jpg
TKO F 80 Sikla Framo 80 Beam Bracket

Mounts to walls, floors, and ceilings. Can also be used in conjunction with the Simotec Systems 100 and 120 (not sold here) for assembly of crossbars.

Finish: Hot-Dipped Galvanized Steel

Plastic End Cap ADK F 80 included (pre-assembled)

Choose options below

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_STAF80.jpg
STA F 80 Sikla Framo 80 End Support

Base plate with octagonal upright - used in connection with the Beam Bracket (TKO F 80), Cantilever Bracket (AK F 80), or a Beam Section to create crossbars and other configurations.

*Version "A" is designed specifically for connection to cast -in channels (channels that have been cast directly into the building structure).

Finish: Hot-Dipped Galvanized Steel

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_WBDF80.jpg
WBD F 80 Sikla Framo 80 End Support

Ideal for construction of floor or wall mounted supports, as well for crossbars (when used in conjunction with the Beam Section). Connects directly to building structure.

Base plates come in a range of sizes to accommodate varying flange widths.

*For construction of crossbars you must use Type "T" - the octagonal upright allows for maximum use of section width, without interference from screws or plates.

Finish: Hot-Dipped Galvanized Steel

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_AP.jpg
AP Sikla Framo 80 Joining Plate

Several different plate sizes allow the Beam Bracket (TKO F 80) to be attached to various flange widths, or to buildings (when used with heavy load anchors).

Plate includes 1/2'' hardware (4 each: countersink screws, hexagon nuts, and wshers)

Finish: Hot-Dipped Galvanized Steel

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_ASAF80GPL100.jpg
ASA F 80 GPL 100 Sikla Framo 80 Welding Adapter

The welding adapter is used to provide a flexible welding solution for connection to beams, welding plates, and other connection points. Can be used in conjunction with the Beam Bracket (TKO), Cantilever Bracket (AK), or Beam Section to allow construction of crossbars, cantilevers, and other configurations.

Finish: Hot-Dipped Galvanized Steel

More Info
$44.64
Buy
View More
/Public/Images/product/Sikla-Framo80_SAF80.jpg
SA F 80 Sikla Framo 80 Unistrut Channel Adapter

Creates compatability between the Sikla Framo 80 metal framing system and the P1000 (1-5/8'' x 1-5/8'') Unistrut channel, which enables easy set up of pipe lines, etc. 

Finish: Hot-Dipped Galvanized Steel

More Info
$28.64
Buy
View More
/Public/Images/product/Sikla-Framo80_FLSF80.jpg
FLS F 80 Sikla Framo 80 Self Forming Screws

The Threaded Self Forming Screw creates a formlocking connection of Framo 80 system components to the Beam Section. Specially constructed screw prevents overtightening as well as accidental unscrewing.

More Info
$0.60
Buy
View More
/Public/Images/product/Sikla-Framo80_P.jpg
Set P Sikla Framo 80 Assembly Set

Assembly set for connection of Beam Bracket (TKO), Angled Beam Bracket (SKO), or End Support (WBD) to a beam section.

Set includes 4 each: hexagon bolt, beam clip, and hexagon nut, as well as (8) washers

More Info
---
Choose Options
View More
/Public/Images/product/Sikla-Framo80_SBF80.jpg
SB F 80 Sikla Framo 80 U-Holder

Connection element for bilateral fixation of the Beam Section, crossbars, or cantilevers to a steel beam.

**Sold by the each, units are meant to be used in pairs**

More Info
$24.96
Buy
View More
/Public/Images/product/Sikla-Framo80_TPHF80.jpg
TPH F 80 Sikla Framo 80 Beam Section Holder

Encompasses 3 sides of the beam section and securely adheres it directly to the support, free standing channel, channel set in concrete, or to another beam section for frame assembly.

Finish: Hot-Dipped Galvanized Steel

More Info
$8.92
Buy
View More
/Public/Images/product/Sikla-Framo80_ADKF80.jpg
ADK F 80 Sikla Framo 80 End Cap

Yellow plastic End Cap encloses the ends of Beam Sections, Cantilever Brackets (AKF), and Beam Brackets (TKO), providing both safety and aesthetics.

More Info
$0.82
Buy