Braces, Brackets & Hardware Page 1

Electronic Payments

Traffic Safety Products

Braces, Brackets & Hardware

Our Braces, Brackets and Hardware provide solutions to sign supporting needs including how to prevent sign theft, how to prevent wind damage, how to mount multiple signs to a single post, how to mount signs to a light pole, how to keep bees out of sign posts and more.

View More
/Public/Images/product/Z-Bar-1-WMK.jpg
Z-Bar - 2-3/8'' x 1-1/4'' x 3/16'' by 10 feet

Sign backer and supports. 2-3/8" x 1-1/4" x 3/16" thick. 5/16" holes on 1" centers, 2 legs punched ". Great for supporting large signs as a sign backing and stiffener. 10' long.

More Info
$60.50
Buy
View More
/Public/Images/product/SignBracewmk.jpg
Telespar Sign Brace System

How do you support signs in windy conditions? Using the Telespar Sign Brace System helps support aluminum signs in windy conditions. The brace provides additional connection to the edge of the sign while centrally carrying the wind load on the pole. This eliminates the need for additional sign posts while providing added support to the sign itself.

More Info
---
Choose Options
View More
/Public/Images/product/SycamorePinewmk.jpg
Street Sign U-Channel Mounting Post

Fits 2-4 lbs U-channel posts. 1-1/4" x 4' long Telespar for mounting street signs. Assembles in the shop, intalls in minutes.

More Info
$15.20
Buy
View More
/Public/Images/product/850Short-Flat-SqaureCap.jpg
Square Post Cap for Flat or Extruded Signs

Post cap for square sign post. Please chose post O.D. size, blade style, and bracket width below.

** Not all combinations are available for all sizes - if all selections have been made and "call for price" is displayed, cap is not manufactured in that combination. Apologies for any inconvenience.

More Info
---
Choose Options
View More
/Public/Images/product/808-180-Flat.jpg
U-Channel Cap for Flat or Extruded Signs

U-channel Cap: 5-1/4", or 12'' blade length, for use with either flat or extruded signs. Select 90 or 180 degree cap.

More Info
---
Choose Options
View More
/Public/Images/product/808-Flat-RoundCap.jpg
Round Post Cap for Flat or Extruded Signs

Choose either 5-1/4", or 12'' blade length. For use with either flat or extruded signs.

More Info
---
Choose Options
View More
/Public/Images/product/808-Flat-CrossPiece.jpg
90 Degree Crosspiece for Flat or Extruded Signs

90 Degree Crosspiece for use with flat or extruded signs.

Select blade style and bracket width.

More Info
---
Choose Options
View More
/Public/Images/product/827-Flat.jpg
4'' x 4'' Wood Post Top Mount

4" x 4" Wood Post Top Mount for Flat or Extruded Signs

More Info
$11.00
Buy
View More
/Public/Images/product/raincapwmk.jpg
Pyramid Shaped Aluminum Rain Cap

Aluminum decorative pyramid sign post cap for 1-3/4", or 2" posts. Perfect for Highway or Road Applications.

More Info
---
Choose Options
View More
/Public/Images/product/SquareClosureCap.jpg
Square Closure Cap

Closure Cap for square post.

Finish: Die Cast Aluminum

More Info
---
Choose Options
View More
/Public/Images/product/RoundClosureCap.jpg
Round Closure Cap

Round closure cap fits round sign post. Select post size for cap fit.

More Info
---
Choose Options
View More
/Public/Images/product/CDC-250-DomeCap.jpg
Dome Cap for Round Posts

Dome cap for round sign posts. Choose post size below.

More Info
---
Choose Options
View More
/Public/Images/product/CPC-250-AcornCap.jpg
Acorn Cap for Round Posts

Choose round post size below

More Info
---
Choose Options
View More
/Public/Images/product/317-Finial.jpg
Decorative Finial Ornament

Decorative Ornament for Flat or Extruded Blades

More Info
---
Choose Options
View More
/Public/Images/product/10-10-CantileverArmBracket.jpg
Cantilever Arm Bracket

Cantilever Arm Bracket for Flat or Extruded Signs

More Info
$12.35
Buy
View More
/Public/Images/product/ExtensionFor10-10.jpg
15'' Extension for CAM1010 style bracket

15" extension for CAM1010 style bracket

More Info
$12.10
Buy
View More
/Public/Images/product/318-Single.jpg
318 Single or Double Bracket for 2-3/8'' OD Round Post

Bracket for 2-3/8" OD Round Post. " When mounting signs to 2-3/8" Round post use single or back to back brackets and closure caps. Select single or double with or without vandal proof.

More Info
---
Choose Options
View More
/Public/Images/product/11-11-RibBakCounterBore.jpg
No. 11-11 Flat Blade Wing Bracket

4-1/4'' Flat Blade Wing Bracket

  • Rib Back - for use on U-Channel, Round Tube, or Pipe
  • Flat Back - for use on Square, or Wood Posts

Available hole styles: Spot Face, Counter Bore, or Counter Sink

More Info
---
Choose Options
View More
/Public/Images/product/721-WingBracket.jpg
No. 721 Flat Blade Wing Bracket

4-1/4'' Flat Blade Wing Bracket. Uses (2) 5/16'' set screws.

More Info
$4.95
Buy
View More
/Public/Images/product/730-Extruded-WingBracket.jpg
No. 730 Extruded Blade Wing Bracket

Extruded Blade Wing Bracket. Choose length below. Uses (2) 3/8'' x 1'' hex head cap screws with nuts.

More Info
---
Choose Options
View More
/Public/Images/product/731-Flat-WingBracket.jpg
No. 731 Flat Blade Wing Bracket

6'' Flat Blade Wing Bracket. Uses (2) 5/16'' set screws.

More Info
$7.40
Buy
View More
1189100786_lap_splice.jpg
Lap Splice Break Away Hardware for U-Channel Posts

Lap Splice Breakaway System. The RIB-BAK breakaway system made easy. FHWA approved. ASHTO approved. Breakaway hardware for use with U-channel posts and bases. Ensures that posts break off if run over by vehicles.

Silver: for use with 2.00 lbs/ft - 2.50 lbs/ft U-Channel Posts

Gold: for use with 3.00 lbs/ft - 4.00 lbs/ft U-Channel Posts

Box of 50

More Info
---
Choose Options
View More
1186686106.jpg
Slip Safe

Slip Safe, the U-channel breakaway system for high-impact areas.

FHWA approved. ASHTO approved. Full slip safe assembly.

More Info
$49.86
Buy
View More
/Public/Images/product/X2-SlipBasewmk.jpg
Match Plate Hardware

Replacement match plate hardware for Type A High Capacity Slip Base System (pictured here.)

This hardware kit is used in conjunction with Type A systems. Use this replacement kit after your system has been knocked over.

More Info
$21.29
Buy
View More
/Public/Images/product/SignHardware-1wmk.jpg
5/16-18 Sign Hardware Set

5/16"-18 Sign Hardware. Set will install 1 traffic sign, and includes 2 each of the following:

2-1/2" Hex Head Cap Screw
Hex Nut
Flat Washer

More Info
$2.50
Buy
View More
/Public/Images/product/5-16_SignBolt-1wmk.jpg
Sign Post Bolts 5/16''

5/16" x 2", 2-1/4” or 3” long Sign Post Bolts are used for mounting signs to signs posts. They are made of a high quality steel. After fabrication they are coated in an electrogalvanizing process to increase life span in the field. Perfect for attaching signs to sign posts. Select bolt length.

More Info
---
Choose Options
View More
/Public/Images/product/nuloc.jpg
NULOC Nylon Fasteners for Tuff'n Lite Composite Sign Posts

NULOC Nylon Fasteners are designed to secure a variety of materials including fabric, cardboard, plastic or any other material where there is access to the front and back of the items. Each set includes 2 bolts and 2 clips.

NULOC 1 (right)
Components are fastened by first compressing the nylon clip ends to open the jaws, second sliding the nylon clip over the retaining rings on the stem and then releasing the clip at a designated location.

When required, the plastic fastener can be easily removed by compressing the nylon clip ends to disengage the jaws and then sliding it off the stem.

NULOC 2 (left)
Components are fastened by first, sliding the nylon clip onto the stem, by means of the keyway, to the desired position. Second, rotate the nylon clip clockwise to tighten and to secure the locking tabs in place. The nylon clips will not rotate 360 degrees since the threads are blocked on one side of the keyway.

To remove the plastic fastener, simply rotate the nylon clip counterclockwise which disengages the locking tabs. Continue rotating the nylon clip until it stops at the keyway and then slide the nylon clip off the stem.

More Info
---
Choose Options
View More
/Public/Images/product/tufnut.jpg
TUFNUT STEEL SECURITY NUTS

 

TUFNUT STEEL SECURITY NUTS are fastened with regular tools. They can be installed as tightly as desired but are removable for maintenance,and are REUSABLE.
 
Tufnut security nuts are fully adjustable, to give you complete control over how tightly your property 
is secured.
 
First, thread a Tufnut onto your security bolt until the nut base is against the work surface. 
 
Then, thread a second Tufnut onto the bolt, upside-down. Insert a wrench between the two nuts and turn to
fasten. An open-end wrench works best, but you can use almost any wrench or plier tool.
 
Finally, remove the second Tufnut, leaving your property safe and secure.
 
Available in 5/16"-18 and 3/8"-16.
 
Select size.
More Info
---
Choose Options
View More
/Public/Images/product/TufNut-CarriageBoltAdapter.jpg
CARRIAGE BOLT ADAPTER Nylon, Black

 

CARRIAGE BOLT ADAPTERS allow use of any length carriage bolt where you would otherwise use a Tufbolt.
 
The adapters raise the neck of a carriage bolt so it doesn't touch the sign face or work surface.
 
Made of black Nylon, they are designed to prevent the head of the bolt from being grasped and turned. 
 
Sizes are 5/16" and 3/8"

Perfect for Sign Security Installation - Anti-theft.

Select size.

More Info
---
Choose Options
View More
tufbolt.jpg
TUFBOLT SECURITY BOLTS 0.3125'' x 2.5'' or 3.0'' Round Head, Neckless

TUFBOLT SECURITY BOLTS are carriage bolts without a square neck beneath the head. They are useful for

metal-to-metal fastenings where the square neck of a regular carriage bolt won't fit into a drilled hole.
 
On a sign installation, the Tufbolt does not damage the bond between the reflective sheeting and the substrate. 
 
Standard sizes are 5/16 x 2.5'' and 3''.

Perfect for Sign Security Installation – Anti-theft.

Select desired size.

More Info
---
Choose Options
View More
/Public/Images/product/TufNut-OneWayBolt.jpg
One-Way Bolt 0.3125'' x 2.5 Tufnut

One way bolts are security bolts which can be held with a screwdriver to prevent turning during installation but can't be "unscrewed". Perfect for Sign Security Installation - Anti-theft. Select Finish.

More Info
---
Choose Options
View More
/Public/Images/product/TufNut-OneWayBolt.jpg
One-Way Bolt 0.3125'' x 3.0 Tufnut

One way bolts are security bolts which can be held with a screwdriver to prevent turning during installation but can't be "unscrewed". Perfect for Sign Security Installation – Anti-theft. Select finish.

More Info
---
Choose Options
View More
/Public/Images/product/Picture-Not-Avail.png
ONE-WAY BOLT Removal Tool (Not Pictured)

Unique tool for removing and installing one-way bolts.

Perfect for Sign Security Installation - Anti-theft.

More Info
$22.86
Buy
View More
/Public/Images/product/TufNutWasher.jpg
TUFBOLT WASHERS 0.3125'' x 1''
TUFBOLT WASHERS are used under the head of the Tufbolt and One-way Bolt to protect surfaces from abrasion when used on the front face of an assembly.

Size is 5/16" x 1"

Comes in White or Black.

Perfect for Sign Security Installation - Anti-theft

Select color.

More Info
---
Choose Options
View More
/Public/Images/product/TufScrewSystem.jpg
Tufscrew System (screw nut washer nut)

Tufscrew systems replace lag bolts where security is needed.

Each system includes:

  • Tufnut security nuts
  • Double- threaded Tufscrews
  • Tufnut washers
  • Steel acorn driver nuts.

Perfect for Sign Security Installation – Anti-theft. Select desired Tufnut size.

Select size.

More Info
---
Choose Options
View More
/Public/Images/product/TufNutTheftResistantNut.jpg
VANDLGARD Theft-Resistant Breakaway Security Nuts

 

VANDLGARD breakaway security nuts are used when the 1" square base of the Tufnut is too broad to fit the fastening surface.
 
Vandlgard nuts can be installed with regular tools, including socket wrenches. Upon tightening, the hex head shears off, leaving
the 5/8" wide conical base to protect your property.

Perfect for Sign Security Installation – Anti-theft.

Select Size.

More Info
---
Choose Options
View More
/Public/Images/product/TufNutWasher.jpg
TUFNUT WASHERS 0.3125'' or 0.375'' x 1.5''

 

TUFNUT WASHERS protect surfaces from damage when a TUFNUT is used on the front face of an assembly.
 
Oversized Nylon washers (1.5” OD) fit under the base of a Tufnut to prevent damage by abrasion as the nut is tightened.
 
Available in White orBlack 
 
Sizes are 5/16" & 3/8" 
 
(Use 5/16” for TN25)

Perfect for Sign Security Installation – Anti-theft. Select desired size.

Select color and size.

More Info
---
Choose Options