Diamond Plate Stair Tread without Carrier
Diamond Plate Stair Tread with Carrier
Diamond Plate Stair Starter Tread without Carrier
Diamond Plate Stair Starter Tread with CarrierDiamond Plate Stair Tread without CarrierDiamond Plate Stair Tread with CarrierDiamond Plate Stair Starter Tread without CarrierDiamond Plate Stair Starter Tread with CarrierDiamond Plate Stair Treads Type 20
Type 20 Stair Treads are typically manufactured out of Diamond Plate, but aluminum tread plate can also be used. Diamond plate stair treads provide a safe, anti-slip surface for pedestrian traffic on commercial stairs.
Diamond Plate Stair treads are commonly used to build stairs that need to be slip resistant and do not require a concrete fill.
Our stair treads are formed in square and don’t require any rework to fit your fabricated stringer channels.
Diamond plate stair treads are manufactured from high quality diamond plate, also known as checker plate, steel in a variety of configurations and lengths to fit your needs.
Treads are manufactured in a range of material thicknesses: from 1/8” to 3/8” thick, with our without welded carrier plates.
We provide the two main stair tread components for your commercial stair system: the tread, which makes up the main portion of your stair system, and the landing tread, which fits into the landing floor plate.
With decades of experience manufacturing diamond plate steel stair treads for the commercial building industry, you can trust that Eberl stair treads are manufactured out of only the highest quality sheet and plate steel, and are formed with the tightest of tolerances, improving efficiency of installation for commercial steel stair fabricators.
Stair Components and Systems stair treads are available in standard shapes and sizes and are also customizable to your dimensions upon request.
If you’re ready to order, check the DOWNLOADS tab for order forms!
Stair Treads are available in standard shapes and sizes and are also customizable to your dimensions upon request.
MATERIALS
- Hot Rolled Steel
- Cold Rolled Steel
- Pre-Galvanized
- Hot-Dipped Galvanized
- Stainless Steel
- Aluminum
OPTIONS
- Carrier Plates (Welded-On)
- Bolt-Holes Punched in Treads
- Primer Coated (Red Paint, Unless Otherwise Specified)
“Eberl Iron Works, Inc. has met or exceeded our expectations for quality bending of our stair pans and other bent plates. We have yet to encounter any problems with quality or quantities when ordering material with Eberl Iron. Eberl Iron’s friendly staff has yet to let us down. We highly recommend Eberl Iron for custom bending.”
“Thank you so much for working with us and replying so promptly. ALL our stair pan business belongs to Eberl. You folks have it earned with your pricing, service and amazing quality.”
“We really appreciate your customer service, as well as your quality of work. The fabricators in my shop prefer I buy stair pans from Eberl, because they are always accurate and fit up perfectly. Thanks again for all you do and we look forward to future business with you.”
“Eberl Iron recently fabricated some stair pans for us on a project we had in Woods Hole, Mass. You did a great job!”
